IBC Totes RecoPartner-supplied totesRequest a quote
Tote types

Seven ways to
store 275 gallons.

Composite, stainless, reconditioned, rebottled, new, cage-only or repurposed. Each type suits a different liquid and a different budget. This page helps you work out which to request. IBC Totes Reco is a referral service: we pass your request to partner suppliers, who quote you directly.

Quote request

Tell us the liquid and the quantity

We pass your request to a partner supplier, who follows up with a quote. Free, no-obligation quote request.

Business or personal — disposable addresses are rejected
US or Canada only, 10 digits including area code
Two letters — must match the postal code
US ZIP or Canadian postal code
Whole units, 1 – 1,000,000

Required fields are marked *. The request is free and carries no obligation. Your details go to our lead platform and partner suppliers so they can prepare a quote.

Short answer

Most buyers need one of three things. A washed reconditioned composite tote is the usual choice for general industrial liquids. A rebottled tote puts a new HDPE bottle in a reused cage, for when prior contents are a concern. A rinsed, as-is tote is often enough for water, site storage and projects. New and stainless cover the narrower cases where a specification or the chemistry calls for them. All of them are available through partner suppliers, and availability varies.

IBC tote types compared
TypeContact surfaceTypical gradeOften used forAsk the supplier
ReconditionedCleaned original HDPEA / B / CIndustrial liquids, fertiliser, surfactantsPrior contents and how it was cleaned
RebottledNew HDPEALiquids where prior contents are a concernCage condition and marking
New / first-useNew HDPE, or used onceNewSpecification-driven purchasesWhether it is truly unused
Stainless steel304 / 316LVariesLiquids that attack HDPE, repeat cleaningData plate and interior finish
Cage / pallet onlyn/aSoundRebottling, racking, fabricationWeld and frame condition
Upcycled buildsVariesC, repurposedRain catchment, garden and shop projectsWhat the tote held
Accessories & partsn/aNew and usedValves, lids, gaskets, adaptersThread size and seal material

General guidance only. Pricing is by quote from partner suppliers. Suitability for food or regulated goods must be confirmed with the supplier and current regulations.

How to choose

Decide in four questions

Answer these in order. They are also the details a supplier will need.

  1. What goes in it? Name the product, not the category. Chemistry decides the bottle, gasket and valve material before anything else.
  2. Does anything depend on prior contents? If a customer, certifier or regulator will ask what the container held, raise it with the supplier first. A rebottled or new unit removes the prior-contents question, though suitability must still be confirmed with the supplier and current regulations.
  3. How long will it be in service? A short campaign and years of outdoor storage are different purchases. Sunlight degrades HDPE over time, so plan for a cover or shade, or consider stainless.
  4. How will it be handled? Forklift only, or pallet jack too? That decides pallet type. Stacked in storage? That decides how much cage condition matters.

If you would rather answer those with a drawing in front of you, try Tote Studio.

Reference

Dimensions, weights and fittings live on the size chart.

Nominal versus real capacity, footprints, tare and filled weight, valve threads and how to read a UN plate, all cross-referenced.

Buyer questions

Before you commit

Which type of IBC tote should I request?

Work backwards from the liquid. General industrial liquids usually suit a washed reconditioned tote. If you want a bottle that has never held anything, ask about rebottled or new. Water, non-contact storage, site use and projects often suit a lower-grade tote. Solvents and other liquids that attack polyethylene may need stainless. If a specification calls for all-new components, request new. Suitability for food or regulated goods must be confirmed with the supplier and current regulations.

What do grades A, B and C mean?

They are common trade shorthand, not a formal standard, so definitions vary between suppliers. Grade A usually means the cleanest bottles or rebottled units, with new valve, gaskets and lid. Grade B usually means washed industrial totes, with staining or haze allowed. Grade C usually means rinsed, as-is totes that are watertight but cosmetically marked. Ask each supplier what their grade includes.

Is a used IBC tote cheaper than a new one?

Usually, yes, and the gap depends on condition, quantity and freight. Pricing is by quote from partner suppliers, so the only reliable comparison is a quote for your quantity and location.

Can I request a single tote?

Yes. Enter the quantity you need and a partner supplier follows up. Freight on one or two totes can be high compared with the tote itself, so ask whether pickup is possible near you.

Can I see photographs of the units before I buy?

Ask the supplier. Used totes vary from one unit to the next, so photographs of the actual units, or an in-person inspection, are worth requesting before you agree a price.

Keep reading

Related pages

Formats and grades

Common formats and conditions, in one place

Container formats with dimensional data, and a matrix of what each condition usually means. Check the details with the supplier, because units and definitions vary.

Formats

Composite containers

Container formats: typical figures, confirm against the actual unit
FormatNominalUsableL × W × HTare (steel base)Gross, waterOutletLidStack filled
275 gal standard275 gal / 1,041 L≈ 265 gal48 × 40 × 46"≈ 137 lb≈ 2,347 lb2" S60x66" screwPer plate
330 gal standard330 gal / 1,249 L≈ 320 gal48 × 40 × 53"≈ 165 lb≈ 2,834 lb2" S60x66" screwPer plate
550 gal550 gal / 2,082 LVaries by makerVaries; footprint often exceeds 48 × 40"Varies by makerVaries by maker2" or 3"6" screw or similarPer plate
Formats

Stainless vessels

Container formats: typical figures, confirm against the actual unit
FormatNominalUsableL × W × HTare (steel base)Gross, waterOutletLidStack filled
Stainless 275 gal275 gal / 1,041 LVaries by makerOften near 48 × 40"; height variesVaries by makerVaries by maker2" or 3" tri-clamp or NPTManwayPer plate
Stainless 330 gal330 gal / 1,249 LVaries by makerOften near 48 × 40"; height variesVaries by makerVaries by maker2" or 3" tri-clamp or NPTManwayPer plate
Grading

The grade matrix

Common attributes compared across Grade A, Grade B, Grade C and cage-only totes.

Grades A, B and C against cage-only: what each usually means. Grades are not a standard, so confirm the definition with the supplier
Grade AGrade BGrade CCage / pallet only
Bottle appearanceClear or near-clearSome haze or stainingGhosting or heavy stainingn/a
Typical prior contentsKnown, benign productIndustrial, declared by the sellerIndustrial, declared by the sellerAny; ask what it was
Typical cleaningWashed and rinsedWashed to suit the residueRinsedRinsed, if at all
Leak checkAsk the supplierAsk the supplierAsk the suppliern/a
Valve and gasketsUsually newNew or soundSound or newn/a
LidUsually newNew or soundSound or newn/a
MarkingCheck the plateCheck the plateMay be worn or missingCheck the plate
Stacking when filledOnly if the plate and condition allowOnly if the plate and condition allowNot advisedn/a
Food or potable useConfirm with the supplier and current regulationsNot usually suitableNot suitablen/a
Common usesClean-fill liquidsIndustrial liquidsWater, rinse and non-critical dutyRebottling and fabrication
Match the liquid first

What your product does to a container

Work backwards from the chemistry. These tables help with the seal, the weight and the risks to plan around.

Seal compatibility: common media against EPDM, Viton, silicone and PTFE
Elastomer compatibility for outlet gaskets and lid seals: a general guide, confirm with the seal maker and the product SDS
MediumEPDMViton (FKM)SiliconePTFEUsual first choice
Water, potable & processExcellentExcellentExcellentExcellentEPDM
Dilute acids (<10%)GoodExcellentFairExcellentEPDM
Concentrated acidsPoorGoodPoorExcellentPTFE
Caustic soda, alkalisExcellentFairFairExcellentEPDM
Liquid fertilizer, UANExcellentGoodFairExcellentEPDM
Glycols, coolants, de-icerExcellentGoodGoodExcellentEPDM
Surfactants, detergentsExcellentGoodGoodExcellentEPDM
Edible oils, fatsPoorExcellentPoorExcellentViton
Mineral oilsPoorExcellentPoorExcellentViton
Aromatic solventsPoorExcellentPoorExcellentViton
Chlorinated solventsPoorGoodPoorExcellentViton / PTFE
Ketones (acetone, MEK)FairPoorPoorExcellentPTFE
AlcoholsGoodGoodGoodExcellentEPDM
Fuels, diesel, kerosenePoorExcellentPoorExcellentViton
Juice & syrup concentrateExcellentExcellentExcellentExcellentEPDM
Brine, pickling liquorGoodExcellentFairExcellentViton
Hot fill 140–180°FFairExcellentExcellentExcellentViton / silicone
Hydrogen peroxide (dilute)GoodFairFairExcellentEPDM / PTFE
Sodium hypochloriteGoodGoodFairExcellentEPDM
Steam / CIP chemistryExcellentFairGoodExcellentEPDM
Outdoor weathering & ozoneExcellentGoodExcellentExcellentEPDM
Specific gravity and filled weight: check this before you choose a format

Filled weight = tare + (usable gallons × 8.34 lb × specific gravity). Compare the result against the lowest rating in your handling chain, not against the water figure on a spec sheet.

Typical specific gravity and filled weight. A listed weight does not mean a tote suits that product; check the SDS, the plate and current regulations
ProductTypical SG275 gal filled330 gal filled
Acetone0.791,883 lb2,273 lb
Ethanol0.791,883 lb2,273 lb
Kerosene0.811,927 lb2,327 lb
Diesel fuel0.852,016 lb2,433 lb
Mineral oil0.882,082 lb2,514 lb
Biodiesel B1000.882,082 lb2,514 lb
Canola oil0.912,148 lb2,594 lb
Soybean or olive oil0.922,170 lb2,620 lb
Water1.002,347 lb2,834 lb
Vinegar1.012,369 lb2,860 lb
Milk1.032,413 lb2,914 lb
Propylene glycol1.042,436 lb2,941 lb
Apple cider1.052,458 lb2,967 lb
Urea solution (DEF)1.092,546 lb3,074 lb
Ethylene glycol1.112,590 lb3,127 lb
Hydrogen peroxide 35%1.132,634 lb3,181 lb
Hydrochloric acid 31%1.162,701 lb3,261 lb
Salt brine 23%1.172,723 lb3,287 lb
Sodium hypochlorite 12%1.212,811 lb3,394 lb
Glycerine1.262,922 lb3,528 lb
Sulfuric acid 35%1.262,922 lb3,528 lb
Sodium hydroxide 25%1.272,944 lb3,554 lb
UAN 281.282,966 lb3,581 lb
Calcium chloride 30%1.282,966 lb3,581 lb
Latex paint1.303,010 lb3,634 lb
UAN 32 fertilizer1.323,054 lb3,688 lb
Liquid sugar or maple syrup1.333,076 lb3,715 lb
Juice concentrate (70 Brix)1.353,121 lb3,768 lb
High-fructose corn syrup1.383,187 lb3,848 lb
Liquid starter 10-34-01.383,187 lb3,848 lb
Molasses or honey1.423,275 lb3,955 lb
Ferric chloride 40%1.423,275 lb3,955 lb
Potassium hydroxide 45%1.463,364 lb4,061 lb
Sodium hydroxide 50%1.523,496 lb4,222 lb
Phosphoric acid 75%1.583,629 lb4,382 lb
Sulfuric acid 93%1.834,181 lb5,049 lb
Rack beam planning for filled containers: confirm against the rack maker's rating
ConfigurationLoad per beam levelRating needed
One 275 gal, water2,347 lb3,000 lb level
One 275 gal, SG 1.33,010 lb3,500 lb level
Two 275 gal, water4,694 lb5,000 lb level
Two 275 gal, SG 1.36,020 lb6,500 lb level
Two 275 gal, SG 1.56,904 lb7,500 lb level
One 330 gal, water2,834 lb3,000 lb level
One 330 gal, SG 1.33,634 lb4,000 lb level
Two 330 gal, water5,668 lb6,000 lb level
Two 330 gal, SG 1.37,268 lb7,500 lb level
Failure modes: what shortens a container's life

Many of these are handling problems rather than wear, so how you treat a tote matters as much as what you paid for it.

Common failure modes, what causes them and how to prevent them
ModeCauseWhat it looks likeRecoverable?Prevention
UV embrittlementUnshaded outdoor storageChalky, stiff wall with a higher-pitched tapNoCover or shade it
Stress whitening at the radiusOver-fill, freeze, uneven groundWhite crackled lower cornersNoLevel pad, respect max gross mass
Plasticization and ghostingPigment, resin or solvent absorptionPermanent shadow when backlitRebottleMatch chemistry to material
Freeze damageLeft full and sealedBulged panel, split seam, damaged bossSometimes, fittings onlyDrain it or leave headspace, and vent the lid
Valve boss crackingUnsupported pump or rigid pipeStar crazing at the boss rootNo, rebottleSupport the pump separately
Impact punctureForklift tine, drop, collisionHole or deep gougeNoCareful handling
Cage rackingSoft ground, foot impact, over-fillFrame visibly out of squareSometimes, if minorLevel, load-bearing pad
Weld node crackingFatigue, previous field weldRust bloom, then a crackNoNever field-weld a cage
Pallet rot or delaminationTimber base outdoorsSoft bearers, split deckReplace the baseChoose steel or composite
Seal failureCompression set, wrong elastomer, reuseWeeping at the boss or lidYes, with a new sealReplace at every product change
Requesting a quote

What to include, and what to ask

The more specific the request, the more useful the reply from a partner supplier.

ProductThe liquid, by name
QuantityHow many, and how often
Size275, 330 or not sure
ConditionGrade or type, if you know it
LocationWhere the totes are needed
HandlingForklift, pallet jack, dock or lift gate
Questions for the supplier
  1. What did this tote hold? Ask for the product name, not a category.
  2. How was it cleaned and tested? Ask what was done to these units.
  3. What is new on it? Valve, gaskets, lid and dust cap.
  4. Can I see the actual units? Photographs or an in-person inspection.
  5. Is the marking legible? If you need a marked container, check that it suits your use and current regulations.
  6. What is the delivered price? Ask for freight to be included in the quote.
What goes wrong

Seven buying mistakes to avoid

The wrong tote

Requesting a category instead of naming the product

Words like "industrial" do not tell a supplier enough. Name the liquid and the right answer is easier to find.

Bent beams

Not multiplying by specific gravity

A 275 of UAN 32 is heavier than a 330 of water. Check the filled weight against your handling equipment.

A slow leak

Accepting the seal that came with the container

EPDM is the common default and the wrong choice for aromatics, fuels and fats. Match the seal to the liquid.

Unrepairable

Mounting a pump on the outlet

The valve boss is not designed to carry a cantilevered pump. Star crazing at the boss root usually means a new bottle.

Freight surprise

Ordering one or two units delivered

Freight on a small order can be high compared with the tote. Ask about pickup, or a delivered price, before you decide.

An unsafe stack

Stacking a filled tote on a weak cage

Stacking depends on the cage, the pallet and the rating on the plate. A bent cage should not carry a load above it.

A compliance problem

Assuming a legible plate means it is authorised

A marking does not prove a container is currently suitable. Periodic requirements can apply, so check current regulations.

Tote types, photographed

What the common types look like

Illustrative photographs. Units vary, so ask the supplier for images of the totes you are being quoted.

A single 275 gallon IBC tote with a blue ball valve on a galvanised steel pallet
A reconditioned toteA used bottle, cleaned and refitted. Ask what was replaced and what the tote held.
Clean white IBC totes stacked two high outdoors
Stacked totesSquare cages and sound pallets matter here. Check the rating on the plate before stacking.
Mixed used IBC totes of varying condition
Mixed condition totesCondition varies widely. Totes like these may suit water, storage or project use once you know what they held.