IBC Totes RecoPartner-supplied totesRequest a quote
Process · May 11, 2026

Keeping edible-prior totes separate is a forklift problem

A dedicated wash bay only works if forklifts, racks and hoses respect the same boundary. That is a handling discipline, not a chemistry one.

Quote request

Question about this piece?

Put it in the message box. A partner supplier follows up on tote requests.

Business or personal — disposable addresses are rejected
US or Canada only, 10 digits including area code
Two letters — must match the postal code
US ZIP or Canadian postal code
Whole units, 1 – 1,000,000

Required fields are marked *. The request is free and carries no obligation. Your details go to our lead platform and partner suppliers so they can prepare a quote.

Short answer

Cross-contamination at a container wash site is mainly a materials handling problem, not a chemistry problem. Keeping totes with an edible prior history apart from industrial-prior totes usually depends on physical separation: separate storage rows, a wash bay kept for that stock, separate forklift attachments and racks, one-way flow, and independent checks. If a tote will touch food or drinking water, confirm suitability with the supplier and current regulations.

Why people get this backwards

Ask most people how a reconditioner avoids cross-contamination and they will talk about cleaning: hotter water, stronger chemistry, more rinses.

Cleaning matters, and a correctly run hot alkaline cycle with checked rinses removes residue reliably. Good operations measure it, for example with final-rinse pH and conductivity readings. What the chemistry does and does not do.

The bigger risk is everything around the wash. A forklift attachment that lifted a pigment-prior container and then an edible-prior one. A rack shared between rows. A hose end that touched the floor in one area and then went into a container from another. A shortcut taken because a row was full.

None of those are chemistry failures, and none of them show up in a wash record.

Five physical rules

1. Separate storage rows

Incoming edible-prior stock is kept in its own row from the moment it arrives, physically apart from industrial-prior stock, not in a marked zone within a shared row.

The reason is mundane: rows fill up, and when a row is full somebody puts a container in the nearest gap. If that gap is in the other group, the separation is lost and nobody notices.

2. A wash bay kept for that stock

Operations that take this seriously keep a bay that never runs industrial-prior containers. It costs capacity: in busy weeks that bay may sit idle while others are backed up. The rule only has value if it is never broken, because "it was cleaned afterwards" is exactly the assurance it exists to avoid.

3. Separate attachments and racks

Forklift tine sleeves, drum handlers, racks, strapping and lid trays are assigned to one group and marked. Colour coding works better than written labels, because a tired person in a hurry reads colour first.

4. One-way flow

Containers move from arrival to storage to inspection to washing to drying to final check to storage, without going backwards or crossing the other group's path. You cannot take a wrong turn on a one-way route.

5. Independent checks

Some operations have two people assess anything heading for food-contact use, independently, and treat any disagreement as a reason to send the container down a different route, such as rebottling, rather than as a debate.

What this costs

The price of segregation
CostEffect
Dedicated bay idle in busy weeksLower total throughput
Duplicate attachments and racksEquipment and storage space
One-way flow layoutLonger internal travel distances
Independent checksMore inspection time on that stock
Sending doubtful units elsewhereSome units lose value
Separate storage rowsSpace that cannot be flexed

The honest limit

All of this protects a container whose prior service was genuinely edible. None of it turns an industrial-prior container into one suitable for food contact. That is not a handling problem; it is a history problem, and polyethylene can retain traces of what it held.

Where the history is industrial and the need is food contact, a rebottled unit with a new bottle removes the history question, and suitability should still be confirmed with the supplier. How rebottled totes compare with new.

Questions to ask a supplier

  • How do you keep containers with different prior contents apart, from arrival to dispatch?
  • What documents name the prior product, and who signed them?
  • How is the wash checked and recorded?
  • Who decides the grade, and can that decision be overridden?
  • What paperwork comes with the units, and can I see an example before ordering?

Describe what you will store and how many totes you need, and we pass your request to a partner supplier, who can answer these questions and quote. See rebottled totes.


Published May 11, 2026.

segregationprior contentsprocessquality
Reference

Reference tables

General product facts for planning, each on its own page.

Grades: what the labels usually mean
Grades A, B and C against cage-only: what each usually means. Grades are not a standard, so confirm the definition with the supplier
Grade AGrade BGrade CCage / pallet only
Bottle appearanceClear or near-clearSome haze or stainingGhosting or heavy stainingn/a
Typical prior contentsKnown, benign productIndustrial, declared by the sellerIndustrial, declared by the sellerAny; ask what it was
Typical cleaningWashed and rinsedWashed to suit the residueRinsedRinsed, if at all
Leak checkAsk the supplierAsk the supplierAsk the suppliern/a
Valve and gasketsUsually newNew or soundSound or newn/a
LidUsually newNew or soundSound or newn/a
MarkingCheck the plateCheck the plateMay be worn or missingCheck the plate
Stacking when filledOnly if the plate and condition allowOnly if the plate and condition allowNot advisedn/a
Food or potable useConfirm with the supplier and current regulationsNot usually suitableNot suitablen/a
Common usesClean-fill liquidsIndustrial liquidsWater, rinse and non-critical dutyRebottling and fabrication
Unit conversions
Unit conversions used across this site
QuantityFromEquals
Volume1 US gallon3.785 liters
Volume1 liter0.2642 US gallons
Volume275 US gal1,041 liters
Volume330 US gal1,249 liters
Volume1 cubic foot7.481 US gallons
Volume1 US gal0.1337 cubic feet
Weight1 US gal of water8.34 lb
Weight1 liter of water1.0 kg
Weight1 lb0.4536 kg
Weight1 kg2.2046 lb
Weight1 short ton2,000 lb / 907 kg
Length1 inch25.4 mm
Length48"1,219 mm
Length40"1,016 mm
Pressure1 psi6.895 kPa
Pressure1 bar14.5 psi
Pressure1 foot of water head0.433 psi
Temperature140°F60°C
Temperature180°F82°C
Area1 sq ft0.0929 m²
Rainfall yield1" rain on 1,000 sq ft≈ 620 gallons before losses
IBC Totes Reco