IBC Totes RecoPartner-supplied totesRequest a quote
Process · August 12, 2024

What caustic cleaning can and cannot do to a tote

Caustic is strong, but it works on the surface. Knowing where it stops tells you which bottles can be recovered and which cannot.

Quote request

Question about this piece?

Put it in the message box. A partner supplier follows up on tote requests.

Business or personal — disposable addresses are rejected
US or Canada only, 10 digits including area code
Two letters — must match the postal code
US ZIP or Canadian postal code
Whole units, 1 – 1,000,000

Required fields are marked *. The request is free and carries no obligation. Your details go to our lead platform and partner suppliers so they can prepare a quote.

Short answer

Caustic cleaners turn fats and oils from plants and animals into water-soluble soap, and they can break down some paint and adhesive films so that they lift from the wall. They work at the surface. They cannot pull out material that has soaked into the plastic, so a ghosted bottle usually stays ghosted however many times it is washed. Caustic is also hazardous, so it is normally a job for an equipped reconditioner.

Where caustic fits in cleaning

Reconditioners generally match the cleaning method to the residue and use the mildest one that does the job. Water-soluble products may need only rinsing. Oils and filming products usually call for hot water and detergent. Caustic is kept for the residues those methods do not shift.

That order is practical. Caustic solutions can cause severe burns, take energy to heat, and leave wash water that needs proper handling. They also do nothing useful on a residue that plain water would have removed.

How it works on fats

This is the reaction many people half-remember from school. Sodium hydroxide reacts with fats and vegetable oils in a process called saponification, which splits them into glycerol and soap. The greasy film clinging to the wall becomes something that dissolves in the wash water.

Heat matters here. In cool water, fat that has been lifted can settle back on the wall as the water cools, leaving a tote that looks clean and is not. That is why cleaning guides tend to put temperature ahead of pressure for anything oily. The cleaning guide covers this for people washing their own.

Mineral oils are different. They are not fats and do not saponify, so they rely on detergents to lift and carry them instead.

How it works on paint and adhesive films

Latex paints and many water-based adhesives form a tough polymer film as they dry. Once formed, that film no longer dissolves in water, and that is why these residues are hard to clean.

Hot caustic can attack some of these films so that they lose their grip on the wall and come off with spraying. The word to notice is some. Fully cured two-part resins and other cross-linked materials may barely respond. In those cases the bottle is usually finished, though the cage and pallet may still be good for rebottling.

What caustic cannot do

HDPE is a semi-crystalline plastic, and small molecules can migrate into the wall. Solvents, fuels, some dyes and pesticide ingredients, and strong flavor or fragrance oils can all do this. Once they are in the wall, a surface cleaner cannot reach them, and they may slowly come back out into the next product.

What caustic cleaning can generally recover
ResidueHow caustic helpsLikely outcome
Animal and vegetable fatsSaponificationUsually cleans well
Mineral oil, cutting fluidLittle; detergents do the workOften cleans, odor may remain
Latex paint, acrylic pigmentWeakens some filmsFilm may lift, ghosting often remains
Vinyl acetate adhesivesWeakens some filmsVariable; often lower-duty reuse
Cured two-part resinsLittle or noneRebottling
Aromatic solventsNone, absorbedRecycling
Diesel, fuelsNone, absorbedRecycling
Flavor oils, citrus terpenesNone, absorbedRecycling, or keep to one product
Sugars, syrups, brinesNot needed; these dissolve in hot waterUsually cleans well

Why repeating the wash rarely helps

If a stain or odor survives a properly done clean, the residue is probably absorbed rather than stuck on the surface. Another cycle uses more water, energy and chemical without changing the outcome. At that point the sensible choices are lower-duty reuse, rebottling or recycling.

The hazards that matter

  • Skin and eye burns. Caustic solutions can cause serious injury, and hot solutions add the risk of scalding. Follow the product SDS for protective equipment.
  • Reactions with leftover product. Acid residues and some metals, such as aluminum, react with caustic and can give off heat or gas. Never add caustic to a tote with an unknown residue.
  • Damage to seals and fittings. Not all elastomers tolerate caustic. Check compatibility before exposing gaskets and valves. Gasket materials.
  • Rinse quality. Leftover cleaner can affect the next product, so a thorough final rinse matters as much as the wash.
  • Waste water. Spent wash water may not be allowed down a drain. Check the SDS and local rules.
  • Entering a tote. Never climb inside. Clean from outside the container.

Should you use caustic yourself?

Usually not. The chemistry is simple, but everything around it is not: protective equipment, ventilation, temperature control, safe handling of hot chemicals, and a lawful route for the wash water.

For water-soluble or lightly oily residues, hot water, a suitable detergent and a rotating tote nozzle can give good results more safely. If your residue needs more than that, professional reconditioning is the better option, and it is available through partner suppliers.

Not sure whether a tote is worth cleaning? Tell us what it held through the quote form, and a partner supplier can follow up on your options.


Published August 12, 2024.

causticcleaningchemistryreconditioning
Reference

Reference tables

General product facts for planning, each on its own page.

Grades: what the labels usually mean
Grades A, B and C against cage-only: what each usually means. Grades are not a standard, so confirm the definition with the supplier
Grade AGrade BGrade CCage / pallet only
Bottle appearanceClear or near-clearSome haze or stainingGhosting or heavy stainingn/a
Typical prior contentsKnown, benign productIndustrial, declared by the sellerIndustrial, declared by the sellerAny; ask what it was
Typical cleaningWashed and rinsedWashed to suit the residueRinsedRinsed, if at all
Leak checkAsk the supplierAsk the supplierAsk the suppliern/a
Valve and gasketsUsually newNew or soundSound or newn/a
LidUsually newNew or soundSound or newn/a
MarkingCheck the plateCheck the plateMay be worn or missingCheck the plate
Stacking when filledOnly if the plate and condition allowOnly if the plate and condition allowNot advisedn/a
Food or potable useConfirm with the supplier and current regulationsNot usually suitableNot suitablen/a
Common usesClean-fill liquidsIndustrial liquidsWater, rinse and non-critical dutyRebottling and fabrication
Unit conversions
Unit conversions used across this site
QuantityFromEquals
Volume1 US gallon3.785 liters
Volume1 liter0.2642 US gallons
Volume275 US gal1,041 liters
Volume330 US gal1,249 liters
Volume1 cubic foot7.481 US gallons
Volume1 US gal0.1337 cubic feet
Weight1 US gal of water8.34 lb
Weight1 liter of water1.0 kg
Weight1 lb0.4536 kg
Weight1 kg2.2046 lb
Weight1 short ton2,000 lb / 907 kg
Length1 inch25.4 mm
Length48"1,219 mm
Length40"1,016 mm
Pressure1 psi6.895 kPa
Pressure1 bar14.5 psi
Pressure1 foot of water head0.433 psi
Temperature140°F60°C
Temperature180°F82°C
Area1 sq ft0.0929 m²
Rainfall yield1" rain on 1,000 sq ft≈ 620 gallons before losses
IBC Totes Reco