IBC Totes RecoPartner-supplied totesRequest a quote
Compliance · January 12, 2026

"RCRA empty" in practice

Empty is a defined regulatory condition, not a description. The residue limit is the part people remember; the acutely hazardous rules are the part that matters.

Quote request

Question about this piece?

Put it in the message box. A partner supplier follows up on tote requests.

Business or personal — disposable addresses are rejected
US or Canada only, 10 digits including area code
Two letters — must match the postal code
US ZIP or Canadian postal code
Whole units, 1 – 1,000,000

Required fields are marked *. The request is free and carries no obligation. Your details go to our lead platform and partner suppliers so they can prepare a quote.

Short answer

Under the federal hazardous waste rules (RCRA), a container that held a hazardous waste counts as empty only when it meets a defined test: the contents have been removed using the practices commonly employed for that container, and the residue left is within set limits, which are tighter by weight for large containers such as IBCs. Containers that held acutely hazardous wastes have a stricter test that involves rinsing. The details matter, so check the current regulations and your state's rules before you sell or ship.

Why this is not pedantry

Whether a container is empty decides whether the object on your site is a container or a hazardous waste. Those two things have very different handling, transport, record-keeping and liability consequences, and the line between them is a defined test rather than a judgement call.

It also decides who can take it. A container buyer or reconditioner is not a waste treatment facility. A container that does not meet the test may be a waste shipment, and it needs to go somewhere that is permitted to receive it.

The general test, in plain terms

For most hazardous wastes, two conditions both have to hold.

  1. The contents have been removed by the practices commonly employed for that type of container: pouring, pumping, aspirating or draining. Not tipping it and letting most of it run out, and not a method that is plainly inadequate for the product.
  2. The residue is within the limits the rules set, expressed as a depth of residue on the bottom or a percentage of the container's capacity by weight. The weight limit is tighter for large containers than for small ones.

The weight limit is the part that catches people with IBCs. An IBC falls in the large-container category, so the allowable residue by weight is very small. That is why "drained to a drip, valve closed" is the practical standard buyers ask for. Read the current text of the rule for the exact figures.

Acutely hazardous residues are different

For wastes classed as acutely hazardous, removing the contents is not enough. The container generally has to be rinsed, commonly triple-rinsed, with a solvent capable of removing the material, or cleaned by another approved method, and the rinsate is itself a hazardous waste that has to be managed.

This is specialist work. Most tote buyers will not accept containers with acutely hazardous residues at all, and those containers belong with a permitted facility. Why buyers turn loads down.

What this means for a seller

Most used totes never held a hazardous waste. They held a product, and the residue is a product residue. The empty question arises where the prior contents, once they became a waste, would be hazardous waste.

  • Drain to a drip, and close the valve. This meets the practical side of the test and stops the container filling with rain.
  • Capture the heel in a labelled drum. The last gallon is the concentrated part, and it belongs in a container you can account for.
  • Tell the buyer if the prior contents, as a waste, would be hazardous. That changes the paperwork, and sometimes the answer.
  • Tell the buyer if they were acutely hazardous. Then the answer usually changes entirely.
  • Keep the declaration traceable to the site that emptied the totes. It is the document every later step relies on.

What paperwork to keep

Keep a signed prior-contents declaration, a note of how the containers were emptied, the count, and any weight tickets. If containers go to recycling, ask the receiver what records they provide for your files.

Three misconceptions

  1. "It looks empty, so it is empty." Empty is a defined test with numeric limits, and the weight limit for large containers is tight.
  2. "Rinsing makes it empty." Rinsing is required for acutely hazardous residues. For everything else the test is about removal by common practices plus the residue limit, and rinsing creates a rinsate stream that has to go somewhere.
  3. "The hauler is responsible." Characterising the residue and establishing empty status sits with the generator. A hauler moves what you tell them they are moving.

This page is general orientation, not legal advice. Read the regulations in their current form, and check your state's rules. If you have empty totes to sell, describe the prior product on the selling page and we pass your request to a partner supplier, who can tell you whether they can take the lot.


Published January 12, 2026.

RCRAregulationscompliancewaste
Reference

Reference tables

General product facts for planning, each on its own page.

Grades: what the labels usually mean
Grades A, B and C against cage-only: what each usually means. Grades are not a standard, so confirm the definition with the supplier
Grade AGrade BGrade CCage / pallet only
Bottle appearanceClear or near-clearSome haze or stainingGhosting or heavy stainingn/a
Typical prior contentsKnown, benign productIndustrial, declared by the sellerIndustrial, declared by the sellerAny; ask what it was
Typical cleaningWashed and rinsedWashed to suit the residueRinsedRinsed, if at all
Leak checkAsk the supplierAsk the supplierAsk the suppliern/a
Valve and gasketsUsually newNew or soundSound or newn/a
LidUsually newNew or soundSound or newn/a
MarkingCheck the plateCheck the plateMay be worn or missingCheck the plate
Stacking when filledOnly if the plate and condition allowOnly if the plate and condition allowNot advisedn/a
Food or potable useConfirm with the supplier and current regulationsNot usually suitableNot suitablen/a
Common usesClean-fill liquidsIndustrial liquidsWater, rinse and non-critical dutyRebottling and fabrication
Unit conversions
Unit conversions used across this site
QuantityFromEquals
Volume1 US gallon3.785 liters
Volume1 liter0.2642 US gallons
Volume275 US gal1,041 liters
Volume330 US gal1,249 liters
Volume1 cubic foot7.481 US gallons
Volume1 US gal0.1337 cubic feet
Weight1 US gal of water8.34 lb
Weight1 liter of water1.0 kg
Weight1 lb0.4536 kg
Weight1 kg2.2046 lb
Weight1 short ton2,000 lb / 907 kg
Length1 inch25.4 mm
Length48"1,219 mm
Length40"1,016 mm
Pressure1 psi6.895 kPa
Pressure1 bar14.5 psi
Pressure1 foot of water head0.433 psi
Temperature140°F60°C
Temperature180°F82°C
Area1 sq ft0.0929 m²
Rainfall yield1" rain on 1,000 sq ft≈ 620 gallons before losses
IBC Totes Reco