Used totes mostly come from repackagers: plants where liquid arrives in bulk and leaves in smaller packages. Chemical blending, food and beverage manufacturing, printing, metal finishing, agricultural distribution and cleaning-product blending are typical sources. The rule of thumb: if bulk comes in and pails or drums go out, the plant accumulates containers. That explains much of what is available to buy.
The structural logic
Containers pile up wherever there is a packaging-size mismatch. A plant that receives liquid in 275-gallon totes and ships it in 5-gallon pails will end up with empty totes at a steady rate, whether or not anyone has a plan for them.
That is most of the supply side of this trade in one sentence. Grade mix, seasonality and local availability largely follow from which repackagers operate nearby and what they handle.
If you run such a plant, the containers behind your building may be worth offering for reuse rather than paying to have them removed. Selling your totes.
The main sources
1. Chemical blending and repackaging
Bulk surfactant, glycol, solvent and acid arrive in totes; blended products leave in drums, pails and bottles. Steady volume, and often good paperwork because these plants are regulated and keep records.
What reaches the market: often washed industrial stock, with some units ruled out by what they held. Industrial totes.
2. Food and beverage manufacturing
Syrup, concentrate, liquid sugar, brine and oil arrive in totes; finished product leaves in consumer packaging.
What reaches the market: often some of the cleanest used stock, because edible prior contents and indoor storage tend to go together. A common pattern is a clean bottle on a worn timber pallet. Why that pattern happens.
These plants are usually careful about where their containers go, and rightly so. If a used tote will touch food or drinking water, confirm suitability with the supplier and current regulations.
3. Printing and packaging
Ink, coating and adhesive arrive in totes. The containers come back pigmented, and pigment stains permanently.
What reaches the market: mostly Grade C stock and units for rebottling. The cages and pallets are often in good condition because the containers lived indoors.
4. Metal finishing and plating
Plating chemistry, etchants and passivation solutions. Many buyers will not accept the most hazardous end of this stream at all.
What reaches the market: washed industrial stock at best, often lower grades, and a higher share turned down. Cages can suffer chloride and acid-fume attack, which shows as rust at the lower joints.
5. Agricultural distribution
Fertiliser, crop protection products and adjuvants arrive at co-ops and distributors in bulk and leave in smaller packages to growers.
What reaches the market: industrial grades. Totes that held these products are not suitable for food or drinking water, which is the single most important thing for buyers to understand about agricultural stock. Supply tends to be seasonal. Agriculture.
6. Cleaning-product blending
Detergent, bleach and sanitiser concentrate in, retail and institutional packaging out. Much of it is among the easier residues to wash out.
What reaches the market: often good washed industrial stock. Containers that held hypochlorite (bleach) need a careful look, because the product can leave the bottle somewhat embrittled.
What this means for buyers
| Source | Typical stock | Supply pattern |
|---|---|---|
| Chemical blending | Washed industrial | Fairly steady |
| Food and beverage | Cleaner used stock | Fairly steady |
| Printing and packaging | Grade C, rebottling input | Fairly steady |
| Metal finishing | Lower grades, some refused | Fairly steady |
| Agricultural distribution | Industrial grades only | Seasonal |
| Cleaning-product blending | Washed industrial | Fairly steady |
| Single-product fillers | First-use or lightly used | Unpredictable |
| Plant closures and cleanouts | Mixed | Unpredictable |
Two practical points. First, the cleanest used stock is limited by supply, not effort. Washing cannot change what a tote previously held, which is why rebottling exists. Rebottled totes.
Second, first-use stock appears unpredictably. A single-product filler can produce containers that look almost new, but they turn up when they turn up. If you want that kind of stock, say so in your request. New totes.
If you generate empty totes
- Work out your rate. Many plants are surprised how many containers a year they accumulate once someone counts.
- Arrange regular collection rather than clearing a mountain once a year. Smaller, regular lots are easier to place and keep the site clear.
- Keep the paperwork simple. One signed sheet naming the product, from someone at your site, does most of the work. Why it has to be traceable.
- Fit lids and close valves. A container that collected rain and went through a freeze is worth less than the same container kept closed.
Have empties to sell? Send the quantity, the last product and your location on the selling page. We pass your request to a partner supplier, who can follow up. Pricing is by quote, and availability depends on your location.
Published September 21, 2026.