IBC Totes RecoPartner-supplied totesRequest a quote
Teardown · September 7, 2026

What a tote tells you about its previous owner

A container is a record of its own handling. Chalky on one side usually means it lived outdoors facing the sun, and so did everything stored beside it.

Quote request

Question about this piece?

Put it in the message box. A partner supplier follows up on tote requests.

Business or personal — disposable addresses are rejected
US or Canada only, 10 digits including area code
Two letters — must match the postal code
US ZIP or Canadian postal code
Whole units, 1 – 1,000,000

Required fields are marked *. The request is free and carries no obligation. Your details go to our lead platform and partner suppliers so they can prepare a quote.

Short answer

Condition patterns are diagnostic. Chalky on one face usually means outdoor storage in a fixed position. Standing water inside means a missing lid and a likely freeze. Bent feet with a square frame suggests recent impact; square feet with a twisted frame suggests long-term uneven ground. Clean bottle, ruined pallet suggests indoor use on a wet floor. Because totes from one site share a history, each pattern says something about the rest of the lot.

Why patterns matter more than single defects

Every unit still needs checking. But the first few units you look at do more than describe themselves: they tell you what to expect from the rest, and sometimes they suggest the paperwork is wrong.

Containers from one site share a history. They were stored the same way, handled by the same forklift, filled by the same process and neglected on the same schedule. So the damage is correlated, and correlated damage is readable.

The patterns, and what they mean

Chalky on one face, sound on the other

Outdoor storage in a fixed position, often a row against a building or a fence line with one side facing the sun. Sunlight degrades the exposed face while the shaded face stays flexible.

What it suggests: the whole lot had the same exposure, and units on the outside of the row are likely worse than those in the middle. It also suggests the lot was stored rather than used, since containers in regular use get turned around.

Standing water inside

A missing or cracked lid, for long enough to collect rain. In a cold climate that likely means at least one freeze with water inside, so look hard at the lower radius and the valve boss.

What it suggests: lid losses are rarely isolated. If several units have no lids, expect more of the lot to be missing them, and expect the remaining lids to have tired seals. What freeze damage looks like.

Bent feet, square frame

Likely recent forklift impact. The feet took a hit but the frame above has not yet followed, which suggests the damage happened in the last few moves rather than over years.

What it suggests: a handling problem at the site, perhaps a particular doorway or routine. These cages are more often recoverable because the joints have not been stressed for long.

Square feet, twisted frame

The opposite story and a worse one. Nothing hit it: the frame went out of square because it sat loaded on uneven or soft ground for a long time.

What it suggests: outdoor storage on poor ground, and a lot where many cages may be unusable. A long-set twist is generally not worth forcing straight. Why a twisted frame matters.

Clean bottle, ruined pallet

Indoor use on a wet or washed-down floor, usually with timber bases. The bottle was protected from sunlight while the bearers stood in water.

What it suggests: good bottles and cages, with pallets that likely all need replacing. Pallet bases compared.

Heavy staining, everything else perfect

A well-kept fleet used for one product that stains permanently: pigment, latex, resin or a coloured concentrate.

What it suggests: a uniform lot, which is unusual and useful. The units will tend to grade alike, the cages are likely square, and the realistic outcomes are Grade C use or rebottling.

Mixed everything

No pattern at all: several bottle conditions, different pallet types, some lids and some missing. This is an accumulation rather than a fleet, containers that arrived from different sources over years and were never managed.

What it suggests: a cleanout rather than a fleet sale, a wide spread of condition, and prior-contents paperwork that will need careful work. Site cleanouts.

Reading the stencils and labels

What markings can suggest
ObservationLikely meaning
Several old reconditioner marksThe container has been reused before, usually a good sign
Owner's stencil, applied consistentlyA managed fleet; the paperwork is more likely to be accurate
Two different owners' stencilsResale history; check the prior-contents trail
Half-torn label over the UN plateSlows inspection and lowers value
Product name handwritten in markerA site that was trying, which beats nothing
Units numbered in sequenceA tracked fleet; records may exist, worth asking
No markings at all, clean cagePossibly first-use or lightly used stock

Why sellers should look too

If you own the totes, these patterns are news worth having. Cages twisting because containers stand on unprepared ground, or bottles chalking along one fence line, are problems you can fix for the next batch.

It works the other way as well. A lot written off as scrap may contain sound containers nobody looked at closely. Check before you assume.

What you can do with this

  • If you are buying remotely, ask first for a wide shot of the lot as it stands. Storage conditions predict condition better than any close-up. The seven photographs.
  • If you own a fleet, turn containers occasionally so one face does not take all the sunlight, and stand them on something level and load-bearing.
  • If you are selling, describe the pattern yourself. "Outdoors against a fence for four years" is what a buyer will find anyway, and an honest description makes the sale smoother.

Have totes to sell? Describe the lot on the selling page, and we pass your request to a partner supplier, who can follow up. Pricing is by quote.


Published September 7, 2026.

inspectiondiagnosticsconditiongrading
Reference

Reference tables

General product facts for planning, each on its own page.

Grades: what the labels usually mean
Grades A, B and C against cage-only: what each usually means. Grades are not a standard, so confirm the definition with the supplier
Grade AGrade BGrade CCage / pallet only
Bottle appearanceClear or near-clearSome haze or stainingGhosting or heavy stainingn/a
Typical prior contentsKnown, benign productIndustrial, declared by the sellerIndustrial, declared by the sellerAny; ask what it was
Typical cleaningWashed and rinsedWashed to suit the residueRinsedRinsed, if at all
Leak checkAsk the supplierAsk the supplierAsk the suppliern/a
Valve and gasketsUsually newNew or soundSound or newn/a
LidUsually newNew or soundSound or newn/a
MarkingCheck the plateCheck the plateMay be worn or missingCheck the plate
Stacking when filledOnly if the plate and condition allowOnly if the plate and condition allowNot advisedn/a
Food or potable useConfirm with the supplier and current regulationsNot usually suitableNot suitablen/a
Common usesClean-fill liquidsIndustrial liquidsWater, rinse and non-critical dutyRebottling and fabrication
Unit conversions
Unit conversions used across this site
QuantityFromEquals
Volume1 US gallon3.785 liters
Volume1 liter0.2642 US gallons
Volume275 US gal1,041 liters
Volume330 US gal1,249 liters
Volume1 cubic foot7.481 US gallons
Volume1 US gal0.1337 cubic feet
Weight1 US gal of water8.34 lb
Weight1 liter of water1.0 kg
Weight1 lb0.4536 kg
Weight1 kg2.2046 lb
Weight1 short ton2,000 lb / 907 kg
Length1 inch25.4 mm
Length48"1,219 mm
Length40"1,016 mm
Pressure1 psi6.895 kPa
Pressure1 bar14.5 psi
Pressure1 foot of water head0.433 psi
Temperature140°F60°C
Temperature180°F82°C
Area1 sq ft0.0929 m²
Rainfall yield1" rain on 1,000 sq ft≈ 620 gallons before losses
IBC Totes Reco