IBC Totes RecoPartner-supplied totesRequest a quote
Process · August 24, 2026

Tote grade definitions, and why they need writing down

A grade is either a written promise or an adjective. Before money moves, make sure you are buying the former.

Quote request

Question about this piece?

Put it in the message box. A partner supplier follows up on tote requests.

Business or personal — disposable addresses are rejected
US or Canada only, 10 digits including area code
Two letters — must match the postal code
US ZIP or Canadian postal code
Whole units, 1 – 1,000,000

Required fields are marked *. The request is free and carries no obligation. Your details go to our lead platform and partner suppliers so they can prepare a quote.

Short answer

Grades A, B and C are common trade shorthand, not a formal standard, and definitions vary between suppliers. Roughly: Grade A is the cleanest used stock (or rebottled), Grade B is washed industrial, and Grade C is rinsed, as-is stock for non-critical use. Before you buy, get the supplier's definitions in writing, including what is permitted, how the grade is checked, and what happens if you disagree on arrival.

Why a grade has to be written down

Used containers are traded on condition, and condition is a judgement. If that judgement is expressed in adjectives (good, clean, excellent), the buyer and seller can be describing different objects with the same words, and the disagreement only surfaces after delivery.

The fix is not better adjectives. It is a definition that says what is permitted and what is not, shared before the sale, applied consistently, and agreed in the terms of the deal.

Where disputes usually start

"Clean"

A tote can be clean by the standard of the person who washed it and not by the standard of the person who fills it. Nobody lied, and nobody agreed anything either. A definition should say how the tote was cleaned and how that was checked, not just that it is clean.

"Structurally sound" and stacking

A buyer may reasonably read "structurally sound" as fit to stack filled. A cage that is slightly out of square carries bending as well as compression, and bending is what tubular steel handles worst. A good definition says plainly whether a grade may be stacked when filled. Why a small twist matters.

"Documented" prior contents

A broker's written assurance can look like documentation and be worth very little: the broker heard it from someone who heard it from the plant. A useful definition requires a declaration from a named person at the site that emptied the container, naming the actual product. Why traceability matters.

Typical grade descriptions

Grades A, B and C as commonly described (check each supplier's own definitions)
Grade AGrade BGrade C
Bottle appearanceClear or near-clearHaze and staining permittedHeavier staining permitted
Prior contentsDeclared and traceableDeclared, industrialDeclared, industrial
CleaningFull wash, recordedWash suited to residueRinse
Leak testingAsk the supplierAsk the supplierAsk the supplier
Valve and gasketsUsually newUsually new or soundSound, as-is
Stacking when filledAsk the supplierAsk the supplierOften excluded
Typical useMost demanding applicationsIndustrial liquidsWater storage, projects

If the tote will touch food or drinking water, a grade name alone settles nothing. Confirm suitability with the supplier and current regulations.

Who assigns the grade matters

A grade decided by the person who benefits from a higher grade is a negotiating position, not a definition. The stronger arrangement is an inspector who records the grade before a price is set, and who cannot be overruled by whoever is making the sale.

It is also worth asking whether grades only ever move down on re-inspection. A supplier who re-grades upward to clear stock is telling you how much the grade is worth.

Sensible features of a grading scheme

  • Few grades. More grades mean more boundary disputes and definitions nobody can remember. Three coarse grades can be clearer than five fine ones.
  • Parts sold as parts. Cage-only and scrap units should be sold as components, not given a grade that implies they were assessed as containers.
  • Honest warranty terms. The lowest grade is often sold as-is. That is fine if it is said plainly.
  • Definitions on the paperwork you keep, not only on a web page.

If you are buying from anybody

Ask for the grade definitions in writing before money moves, and ask three follow-ups: who assigns the grade, can sales overturn it, and what happens if I disagree on arrival.

The answers tell you a great deal. A seller with written definitions, an independent inspector and a stated inspection window is running a system. A seller offering reassurance is offering an adjective. How to buy a lot you cannot visit.

Tell us the grade you need and what you will store, and we pass your request to a partner supplier. Ask them for their grade definitions in writing with the quote. Reconditioned totes.


Published August 24, 2026.

gradestermsqualitybuying
Reference

Reference tables

General product facts for planning, each on its own page.

Grades: what the labels usually mean
Grades A, B and C against cage-only: what each usually means. Grades are not a standard, so confirm the definition with the supplier
Grade AGrade BGrade CCage / pallet only
Bottle appearanceClear or near-clearSome haze or stainingGhosting or heavy stainingn/a
Typical prior contentsKnown, benign productIndustrial, declared by the sellerIndustrial, declared by the sellerAny; ask what it was
Typical cleaningWashed and rinsedWashed to suit the residueRinsedRinsed, if at all
Leak checkAsk the supplierAsk the supplierAsk the suppliern/a
Valve and gasketsUsually newNew or soundSound or newn/a
LidUsually newNew or soundSound or newn/a
MarkingCheck the plateCheck the plateMay be worn or missingCheck the plate
Stacking when filledOnly if the plate and condition allowOnly if the plate and condition allowNot advisedn/a
Food or potable useConfirm with the supplier and current regulationsNot usually suitableNot suitablen/a
Common usesClean-fill liquidsIndustrial liquidsWater, rinse and non-critical dutyRebottling and fabrication
Unit conversions
Unit conversions used across this site
QuantityFromEquals
Volume1 US gallon3.785 liters
Volume1 liter0.2642 US gallons
Volume275 US gal1,041 liters
Volume330 US gal1,249 liters
Volume1 cubic foot7.481 US gallons
Volume1 US gal0.1337 cubic feet
Weight1 US gal of water8.34 lb
Weight1 liter of water1.0 kg
Weight1 lb0.4536 kg
Weight1 kg2.2046 lb
Weight1 short ton2,000 lb / 907 kg
Length1 inch25.4 mm
Length48"1,219 mm
Length40"1,016 mm
Pressure1 psi6.895 kPa
Pressure1 bar14.5 psi
Pressure1 foot of water head0.433 psi
Temperature140°F60°C
Temperature180°F82°C
Area1 sq ft0.0929 m²
Rainfall yield1" rain on 1,000 sq ft≈ 620 gallons before losses
IBC Totes Reco